Fiberfil J-60/20/FR Fiberfil Polypropylene Homopolymer (Glass Fiber Reinforcement, 20%)

General

Material Status

Availability

Filler / Reinforcement

Features

Forms

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow			ASTM D955
0.125 in		in/in
0.250 in		in/in
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ASTM D638
Tensile Strength (73°F)		psi	ASTM D638
Tensile Elongation (Yield, 73°F)		%	ASTM D638
Flexural Modulus - Tangent (73°F)		psi	ASTM D790
Flexural Strength (73°F)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.125 in)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Fiberfil® J-60/20/FR, Fiberfil J6020FR, Fiberfil® , Fiberfil, FiberfilJ6020FR, J 60 20 FR, J-60/20/FR, J6020FR, J-60:20:FR, J-60+20+FR, J-60-20-FR, J-60_20_FR, J-60 20 FR, J:60/20/FR, J/60/20/FR, J+60/20/FR, J_60/20/FR, J 60/20/FR, J60, 6020, 20FR, J60_20_FR, J60 20 FR, J_6020FR, J 6020FR, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, PolypropyleneHomopolymer, PPHomopolymer, 60J

Notes

¹Typical properties: these are not to be construed as specifications.

Fiberfil® J-60/20/FR