IDES Prospector Already have an account? Login Here

IDES

GELOY* XP4034 Resin

Acrylonitrile Styrene Acrylate + PC

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for GELOY* XP4034 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Available in a wide range of colors. Recommended for unpainted exterior/high heat/high impact applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • High Heat Resistance
  • High Impact Resistance
  
Uses 
  • Outdoor Applications
Automotive Specifications 
Appearance 
  • Colors Available
Processing Method 
  • Injection Molding
  • Sheet Extrusion
  
Multi-Point Data 
  • Coefficient of Thermal Expansion vs. Temperature (ASTM E831)
  • Elastic Modulus vs Temperature (ASTM D4065)
  • Flexural DMA (ASTM D4065)
  • Pressure-Volume-Temperature (PVT - Zoller Method)
  • Shear DMA (ASTM D4065)
  • Specific Heat vs. Temperature (ASTM D3417)
  • Tensile Creep (ASTM D2990)
  • Tensile Fatigue
  • Tensile Stress vs. Strain (ASTM D638)
  • Thermal Conductivity vs. Temperature (ASTM E1530)
  • Viscosity vs. Shear Rate (ASTM D3835)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
220°C/10.0 kg
g/10 min
  
260°C/5.0 kg
g/10 min
  
280°C/3.8 kg
g/10 min
  
Molding Shrinkage
     Internal Method
Flow: 0.126 in
in/in
  
Across Flow: 0.126 in
in/in
  
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Strength
      
Yield 2
psi
 ASTM D638
Yield
psi
 ISO 527-2/50
Break
psi
 ISO 527-2/50
Tensile Strain
      
Yield
%
 ISO 527-2/50
Break 2
%
 ASTM D638
Break
%
 ISO 527-2/50
Flexural Modulus
      
1.97 in Span 3
psi
 ASTM D790
-- 4
psi
 ISO 178
Flexural Strength
      
-- 4, 5
psi
 ISO 178
Yield, 1.97 in Span 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 6 (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact
      
-22°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-22°F 7
ft·lb/in²
 ISO 180/1A
73°F 7
ft·lb/in²
 ISO 180/1A
Instrumented Dart Impact
     ASTM D3763
-22°F, Total Energy
in·lb
  
73°F, Total Energy
in·lb
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.126 in
°F
 ASTM D648
66 psi, Unannealed, 2.52 in Span 8
°F
 ISO 75-2/Bf
264 psi, Unannealed, 0.252 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 8
°F
 ISO 75-2/Af
Vicat Softening Temperature
°F
 ISO 306/B50
CLTE
     ASTM E831
Flow: -4 to 302°F
in/in/°F
  
Transverse: -4 to 302°F
in/in/°F
  
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM C177
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
UL
Nominal Value
Unit
Test Method
Outdoor Suitability
 
 UL 746C
Optical
Nominal Value
Unit
Test Method
Gardner Gloss (60°, Untextured)
 
 ASTM D523
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: GELOY* XP4034 Resin, GELOY XP4034 Resin, GELOY* , GELOY, GELOYXP4034Resin, XP 4034 Resin, XP4034 Resin, XP4034, 4034Resin, XP4034Resin, Acrylonitrile Styrene Acrylate + PC, Acrylonitrile Styrene Acrylate PC, Acrylonitrile Styrene Acrylate : PC, Acrylonitrile Styrene Acrylate / PC, Acrylonitrile Styrene Acrylate - PC, Acrylonitrile Styrene Acrylate _ PC, Acrylonitrile Styrene Acrylate PC, ASA+PC, ASAPC, ASA:PC, ASA/PC, ASA-PC, ASA_PC, ASA PC, Acrylonitrile Styrene Acrylate, ASA, SABIC IP, AcrylonitrileStyreneAcrylatePC, AcrylonitrileStyreneAcrylate, AcrylonitrileStyreneAcrylate_PC, 4034XP
Features
Features may also be described by the following terms: High Impact Resistance, High Heat Resistance.
Automotive Specifications
This plastic material has approval for 4 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1), CHRYSLER (1), GM (2).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Drying Time (Cumulative): 8 hrs
Minimum Moisture Content: 0.04 %
Roll Stack Temp - Bottom: 74 - 91 °C
Roll Stack Temp - Middle: 93 - 110 °C
Roll Stack Temp - Top: 102 - 118 °C
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
30.051 in/min
40.079 in/min
5Yield
680*10*4 sp=62mm
780*10*4
880*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.