IDES Prospector Already have an account? Login Here

IDES

VALOX* 451E Resin

Polybutylene Terephthalate

Glass Fiber Reinforcement, 20%

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for VALOX* 451E Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
20% GR. Easy flow version of VALOX 451.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Features 
  • Good Flow
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Viscosity vs. Shear Rate (ASTM D3835)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Specific Volume
in³/lb
 ASTM D792
Molding Shrinkage
     Internal Method
Flow  2
in/in
  
Flow  3
in/in
  
Across Flow  2
in/in
  
Across Flow  4
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 5 (Break)
psi
 ASTM D638
Flexural Modulus 6 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 6 (Break, 1.97 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.252 in
°F
  
264 psi, Unannealed, 0.252 in
°F
  
Electrical
Nominal Value
Unit
Test Method
Arc Resistance (PLC) 7
 
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0280 in
 
  
0.118 in
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Comparative Tracking Index (CTI) (PLC)
 
 UL 746
High Voltage Arc Tracking Rate (HVTR) (PLC)
 
 UL 746
Hot-wire Ignition (HWI) (PLC)
 
 UL 746
High Amp Arc Ignition (HAI) (PLC)
 
 UL 746
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: VALOX* 451E Resin, VALOX 451E Resin, VALOX* , VALOX, VALOX451EResin, 451 E Resin, 451E Resin, 451E, EResin, 451EResin, Polybutylene Terephthalate, PBT, Polyester, SABIC IP, PolybutyleneTerephthalate, E451
Features
Features may also be described by the following terms: Good Flow.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
21.5 to 3.2 mm
33.2 to 4.6 mm
43.2-4.6 mm
5Type I, 0.20 in/min
60.051 in/min
7Tungsten Electrode
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.