IDES Prospector Already have an account? Login Here

IDES

Ultrathene® UE662157

Ethylene Vinyl Acetate Copolymer

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Ultrathene® UE662157 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ULTRATHENE UE 662-157 is an EVA copolymer with excellent processability and good adhesion. Applications include extrusion coating on various substrates for flexible packaging and laminations. UE 662-157 contains high levels of slip and antiblock.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Additive 
  • High Antiblock
  • High Slip
  
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Adhesion
  • Good Processability
  • High Antiblocking
  • High Slip
Uses 
  • Coating Applications
  • Laminates
  • Packaging
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Vinyl Acetate Content
wt%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Break)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultrathene® UE662157, Ultrathene UE662157, Ultrathene® , Ultrathene, UltratheneUE662157, UE 662157, UE662157, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, LyondellBasell, EthyleneVinylAcetateCopolymer, 662157UE
Features
Features may also be described by the following terms: High Antiblocking, High Antiblock, Good Adhesion, High Slip, Good Processability, Easy Processing.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
Maximum recommended melt temperature: 450°F (232°C).
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 20 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.