IDES Prospector Already have an account? Login Here

IDES

MonoSol® M1030 38µ

Polyvinyl Alcohol

Supplied by MonoSol, LLC

The technical datasheet with complete property values for MonoSol® M1030 38µ is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
MonoSol M1030 is a PVOH based thermoplastic film, soluble in hot water and manufactured using MonoSol's proprietary solution cast technology.

MonoSol M1030 is a hot water-soluble general purpose PVOH film. With high elongation, M1030 performs well in molding and vacuum bag operations. The maximum use temperature is 275 F (135 C). Standard thicknesses are 38 micron (1.5 mil), 51 micron (2.0 mil) and 76 micron (3.0 mil).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Biodegradable
  • Water Soluble
  
Uses 
  • Film
  • Vacuum Bagging Film
  
Forms 
  • Film
Physical
Nominal Value
Unit
Test Method
Moisture Content 2 (73°F, 1.5 mil)
wt%
  
Solubility 3
      
Disintegration: 140°F, 1.5 mil
sec
  
Dissolution: 140°F, 1.5 mil
sec
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Thickness - Recommended / Available
 
  
Secant Modulus
      
10%, MD: 1.5 mil
psi
 ASTM D882
100%, MD: 1.5 mil
psi
 ASTM D882
10%, MD: 73°F, 1.5 mil
psi
 ISO 527-3
100%, MD: 73°F, 1.5 mil
psi
 ISO 527-3
Tensile Strength - MD
      
Break, 1.5 mil
psi
 ASTM D882
73°F, 1.5 mil
psi
 ISO 527-3
Tensile Elongation - MD
      
Break, 1.5 mil
%
 ASTM D882
Break, 73°F, 1.5 mil
%
 ISO 527-3
Elmendorf Tear Strength - MD
      
1.5 mil
g
 ASTM D1922
1.5 mil
lbf
 ISO 6383-2
Yield 4 (73°F, 1.5 mil)
in²/lb
  
Thermal
Nominal Value
Unit
Test Method
Max. Continuous Use Temperature
°F
  
Related Terminology
This supplier and product may also be known by these terms: Mono-Sol

Product names can be difficult to match. You may have searched any one of these terms to find this product: MonoSol® M1030 38µ, MonoSol M1030 38µ, MonoSol® , MonoSol, MonoSolM103038µ, M 1030 38, M1030 38µ, M1030, 103038, M103038µ, Polyvinyl Alcohol, PVOH, Vinyl Alcohol, VOH, PolyvinylAlcohol, VinylAlcohol, 1030M
Uses
Uses may also be described by the following terms: Vacuum Bagging Film.
Notes
1Typical properties: these are not to be construed as specifications.
250%RH
3Distilled Water (MSTM 205)
4density at 1.28 g/cc
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.