|
Specific Gravity
|
|
|
ASTM D792 |
|
Water Absorption (73°F, 24 hr)
|
|
%
|
ASTM D570 |
|
Tensile Modulus 2 (73°F)
|
|
psi
|
ASTM D638 |
|
Tensile Strength 2
|
|
|
ASTM D638 |
|
Yield, 73°F
|
|
psi
|
|
|
Break, 73°F
|
|
psi
|
|
|
Tensile Elongation 2 (Break, 73°F)
|
|
%
|
ASTM D638 |
|
Flexural Modulus 3 (73°F)
|
|
psi
|
ASTM D790 |
|
Flexural Strength 3 (Yield, 73°F)
|
|
psi
|
ASTM D790 |
|
Notched Izod Impact (73°F)
|
|
ft·lb/in
|
ASTM D256 |
|
Unnotched Izod Impact
|
|
|
ASTM D256 |
|
-40°F
|
|
|
|
|
-22°F
|
|
|
|
|
-4°F
|
|
|
|
|
73°F
|
|
|
|
|
Rockwell Hardness (R-Scale)
|
|
|
ASTM D785 |
|
Impact Resistance (Puncture), ASTM D3763, Energy @ max Load 2.5mm (.1in) thick @ 23°C (73°F): 21 ft-lbf
Impact Resistance (Puncture), ASTM D3763, Energy @ max Load 2.5mm (.1in) thick @ -40°C (-40°F): 30 ft-lbf
Impact Resistance (Puncture), ASTM D3763, Energy @ max Load 3.2mm (.125in) thick @ 23°C (73°F): 24 ft-lbf
Impact Resistance (Puncture), ASTM D3763, Energy @ max Load 3.2mm (.125in) thick @ -40°C (-40°F): 37 ft-lbf
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: VPI 6500 Series, VPI , VPI6500Series, 6500 Series, 6500Series, Polyethylene Terephthalate Glycol Comonomer, PETG, Polyester, PolyethyleneTerephthalateGlycolComonomer, Series6500
|
|
Features may also be described by the following terms: High Clarity, Good Impact Resistance, Ethylene Oxide Sterilizable, EtO Sterilizable, EtO Sterilization, Ethylene Oxide Sterilizable, Radiation Sterilizable, Radiation Sterilization, gamma sterilization, gamma sterilizable, Good Tear Strength.
|
|
Uses may also be described by the following terms: Cosmetic Packaging, Medical Packaging.
|
|
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
|