IDES Prospector Already have an account? Login Here

IDES

Alathon® 9301

High Density Polyethylene

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Alathon® 9301 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ALATHON 9301 is a high density polyethylene resin designed for sheet extrusion and thermoforming. ALATHON 9301 exhibits very low sag and high stiffness.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Features 
  • Food Contact Acceptable
  • High Stiffness
  
Uses 
  • Profiles
  • Sheet
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Profile Extrusion
  • Sheet Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Additional Information
Elongation at Break, ASTM D638: >700%
Tensile Impact, ASTM D1822: 92 ft-lb/in
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Alathon® 9301, Alathon 9301, Alathon® , Alathon, Alathon9301, 9301, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, LyondellBasell, PolyethyleneHighDensity
Features
Features may also be described by the following terms: High Stiffness.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.