IDES Prospector Already have an account? Login Here

IDES

Tecnoflon® FOR 60K

Fluoroelastomer

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for Tecnoflon® FOR 60K is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TECNOFLON® FOR 60K is a medium-low viscosity cure incorporated fluoroelastomers copolymer. This grade is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR 60K greatly reduces the reject rate due to adhesion problems.

Some of the basic properties of Tecnoflon® FOR 60K are:
  • Superior bonding to metal
  • Very good scorch safety
  • Superior mold flow
  • Lack of mold fouling
  • Excellent hot tear resistance
  • Excellent mold release

Tecnoflon® FOR 60K can be used for injection, compression, and transfer moulding of gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Bondability
  • Copolymer
  • Good Adhesion
  • Good Mold Release
  • Good Tear Strength
  • High Flow
  • Medium-low Viscosity
Uses 
  • Adhesives
  • Blending
  • Bonding
  • Gaskets
  • Hose
  • Metal Bonding
  • Profiles
  • Seals
  • Sheet
Appearance 
  • Off-White
Forms 
  • Slab
Processing Method 
  • Calendering
  • Compounding
  • Compression Molding
  • Extrusion
  • Injection Molding
  • Resin Transfer Molding
Physical
Nominal Value
Unit
 
Mooney Viscosity 2 (ML 1+10, 250°F)
MU
  
Fluorine Content 2
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tecnoflon® FOR 60K, Tecnoflon FOR 60K, Tecnoflon® , Tecnoflon, TecnoflonFOR60K, FOR 60 K, FOR 60K, FOR60, 60K, FOR60K, Fluoroelastomer, Fluorelastomer, Fluoropolymer, Solvay Specialty, 60FOR
Features
Features may also be described by the following terms: Good Adhesion, Medium-Low Viscosity, Medium Viscosity, Low Viscosity, Medium Low Viscosity, Bondability, Bondable, High Flow, High Melt, High MFI, Good Mold Release, Easy Release, Good Demolding, Good Tear Strength.
Uses
Uses may also be described by the following terms: Metal Bonding, Gaskets, Gasketing.
Notes
1Typical properties: these are not to be construed as specifications.
2Raw polymer
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.