IDES Prospector Already have an account? Login Here

IDES

Quadrant EPP Ertalyte® PET-P

Polyethylene Terephthalate

Supplied by Quadrant Engineering Plastic Products

The technical datasheet with complete property values for Quadrant EPP Ertalyte® PET-P is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Crystalline
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Corrosion Resistance
  • Good Creep Resistance
  • Good Dimensional Stability
  • Good Electrical Properties
  • Good Wear Resistance
  • Good Weather Resistance
  • High Rigidity
  • High Strength
  • Low Moisture Absorption
  • Radiation (Gamma) Resistant
Uses 
  • Bearings
  • Bushings
  • Gears
  • Housings
  • Pump Parts
  • Seals
  • Thrust Washer
  • Valves/Valve Parts
Agency Ratings 
Appearance 
  • Black
  • White
  
Forms 
  • Rod
  • Sheet
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Water Absorption
     ISO 62
73°F, 24 hr
%
  
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Water Absorption
     ISO 62
73°F, 0.12 in 2
mg
  
73°F, 0.12 in 3
%
  
73°F, 0.12 in 4
mg
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 5
psi
 ISO 527-2/1
Tensile Stress 5 (Yield)
psi
 ISO 527-2/20
Tensile Strain 6 (Break)
%
 ISO 527-2/20
Tensile Creep Modulus 7, 8 (1000 hr)
psi
 ISO 899-1
Compressive Stress
     ISO 604/1
5% Strain
psi
  
2% Strain
psi
  
1% Strain
psi
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact Strength 5
ft·lb/in²
 ISO 180/2A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale, 0.394 in)
 
 ISO 2039-2
Ball Indentation Hardness (0.394 in)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 9 (264 psi, Unannealed)
°F
 ISO 75-2/A
Max. Continuous Use Temperature
      
-- 10
°F
  
-- 11
°F
  
-- 12
°F
  
Melting Temperature (DSC)
°F
  
CLTE - Flow
      
73 to 140°F
in/in/°F
  
73 to 212°F
in/in/°F
  
Thermal Conductivity (73°F)
Btu·in/hr/ft²/°F
  
Service Temperature - Minimum
°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity 9
ohms
 IEC 60093
Volume Resistivity 5
ohm·cm
 IEC 60093
Relative Permittivity 9
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Dissipation Factor 9
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Comparative Tracking Index 9
V
 IEC 60112
Electric Strength 5 (0.0394 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.118 in
 
  
0.236 in
 
  
Oxygen Index
%
 ISO 4589-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quadrant EPP Ertalyte® PET-P, Quadrant EPP Ertalyte PETP, Quadrant EPP , QuadrantEPPErtalytePETP, QuadrantEPP, Ertalyte® PET, Ertalyte PET, EPPErtalyte® PET-P, EPPErtalyte PETP, EPPErtalyte® PET:P, EPPErtalyte® PET/P, EPPErtalyte® PET+P, EPPErtalyte® PET_P, EPPErtalyte® PET P, EPPErtalytePET, EPPErtalyte® PET, EPPErtalyte PET, EPPErtalytePETP, EPPErtalyte PET_P, EPPErtalyte PET P, Ertalyte® PET-P, Ertalyte PETP, Ertalyte® PET:P, Ertalyte® PET/P, Ertalyte® PET+P, Ertalyte® PET_P, Ertalyte® PET P, ErtalytePET, PETP, EPPErtalytePET_P, ErtalytePETP, Ertalyte PET_P, Ertalyte PET P, ErtalytePET_P, Polyethylene Terephthalate, PET, Polyester, Quadrant, PolyethyleneTerephthalate, PETErtalyte, PETEPPErtalyte
Features
Features may also be described by the following terms: Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, Good Creep Resistance, Creep Resistant, Good Dimensional Stability, Dimensionally Stable, Good Electrical Properties, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, Radiation Resistant, Gamma Stable, Gamma Resistant, Radiation Stable, High Rigidity, High Strength, Good Wear Resistance, Wear Resistant, Good Weather Resistance, Weather Resistant, Good Corrosion Resistance, Corrosion Resistant.
Uses
Uses may also be described by the following terms: Valves, Valve Parts, Housings, Housing.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Weight, 24 hrs
396 hrs
4Weight, 96 hrs
5Conditioned at 23°C/50%RH
6Conditioned at 23°C/ 50%RH
7Type 1B
8Conditioned at 23°C/50%RH, 1% Strain
9Dry
1020000 hrs
115000 hrs
12Short periods
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.