IDES Prospector Already have an account? Login Here

IDES

Quadrant EPP Fluorosint® 500

Polytetrafluoroethylene

Mica Filler

Supplied by Quadrant Engineering Plastic Products

The technical datasheet with complete property values for Quadrant EPP Fluorosint® 500 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
 
Filler / Reinforcement 
  • Mica Filler
Features 
  • Flame Retardant
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Creep Resistance
  • Good Dimensional Stability
  • Good Electrical Properties
  • Good Wear Resistance
  • High Heat Resistance
  • Low Friction
  • Non-Abrasive
Uses 
  • Bearings
  • Bushings
  • Electrical Parts
  • Gaskets
  • Sealing Devices
  • Valves/Valve Parts
  • Washer
  • Wear Strip
Appearance 
  • Ivory
Forms 
  • Customizable Forms
  • Disc
  • Preformed Parts
  • Rod
  • Sheet
  • Tubing
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Water Absorption
    ISO 62
73°F, 24 hr, 0.118 in
%
 
Saturation, 73°F
%
 
Water Absorption 2 (73°F, 0.12 in)
mg
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1B/1
Tensile Stress (Break)
psi
ISO 527-2/1B/5
Tensile Strain (Break)
%
ISO 527-2/1B/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength
 
ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, 0.394 in)
 
ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Max. Continuous Use Temperature
     
-- 3
°F
 
-- 4
°F
 
Melting Temperature (DSC)
°F
 
CLTE - Flow
     
73 to 212°F
in/in/°F
 
73 to 302°F
in/in/°F
 
> 302°F
in/in/°F
 
Thermal Conductivity
Btu·in/hr/ft²/°F
 
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Relative Permittivity (1 MHz)
 
IEC 60250
Dissipation Factor (1 MHz)
 
IEC 60250
Electric Strength (0.0394 in)
V/mil
IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
    UL 94
0.0591 in
 
 
0.118 in
 
 
Oxygen Index
%
ISO 4589-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quadrant EPP Fluorosint® 500, Quadrant EPP Fluorosint 500, Quadrant EPP , QuadrantEPPFluorosint500, QuadrantEPP, EPPFluorosint® 500, EPPFluorosint 500, EPP, EPPFluorosint500, Fluorosint® 500, Fluorosint 500, Fluorosint500, Polytetrafluoroethylene, PTFE, Fluoropolymer, Quadrant, 500Fluorosint, 500EPPFluorosint
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Dimensional Stability, Dimensionally Stable, Good Electrical Properties, Low Friction, High Heat Resistance, Good Wear Resistance, Wear Resistant, Good Creep Resistance, Creep Resistant, Good Abrasion Resistance, Abrasion Resistant, Non-abrasive, Non Abrasive.
Uses
Uses may also be described by the following terms: Valves, Valve Parts, Wear Strip, Wear Strips, Gaskets, Gasketing.
Notes
1Typical properties: these are not to be construed as specifications.
2Weight, 24 hrs
320000 hrs
4Short periods
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.