IDES Prospector Already have an account? Login Here

IDES

BCC Resins BC 5010

Epoxy; Epoxide

Supplied by BCC Products Inc.

The technical datasheet with complete property values for BCC Resins BC 5010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BC 5010 is a high quality, low viscosity room temperature curing laminating resin. A Safety System for the production of a variety if dimensionally stable fiberglass tools. BC 5010 features low odor and rapid "wet-out" with no vertical drain off. An excellent general purpose laminating resin to meet the tooling requirements for automotive, aircraft, and foundry.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Dimensional Stability
  • Low to No Odor
  • Low Viscosity
Uses 
  • Laminates
Appearance 
  • White
Forms 
  • Liquid
Processing Method 
  • Laminating
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Ultimate)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Break)
psi
 ASTM D790
Compressive Strength
psi
 ASTM D695
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
CLTE - Flow
in/in/°F
 ASTM D696
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components      
Hardener
 
  
Resin
 
  
Pot Life (77°F)
min
  
Thermoset Mix Viscosity
cP
 ASTM D2393
Demold Time (75°F)
min
  
Post Cure Time (77°F)
hr
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BCC Resins BC 5010, BCC Resins , BCCResinsBC5010, BCCResins, ResinsBC 5010, Resins, ResinsBC5010, BC 5010, BC5010, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, BCC Products, EpoxyEpoxide, 5010BC, 5010ResinsBC
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Low Odor, Low Viscosity.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.