IDES Prospector Already have an account? Login Here

IDES

BCC Resins BC 7069-2

Epoxy; Epoxide

Aluminum Filler

Supplied by BCC Products Inc.

The technical datasheet with complete property values for BCC Resins BC 7069-2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BC 7069-2 is an aluminum filled, epoxy mass casting resin. This room temperature cure system may be cast to a thickness of 4 inches in non-conductive molds and 5 inches in metal molds without foaming or yielding excessive shrinkage. Casting thickness can be increased by incorporating aluminum needles, puffs or granules. BC 7069-2 when properly cured, provides nearly perfect reproduction, resulting in a dimensionally stable, hard, tough surface. For use in constructing duplicate models, prototypes, patterns, facing dies.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Aluminum Filler
Features 
  • Good Dimensional Stability
  • Good Toughness
  • High Hardness
  • Machinable
  
Uses 
  • Molds/Dies/Tools
  • Prototyping
  
Forms 
  • Liquid
Processing Method 
  • Casting
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ASTM D1505
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Ultimate)
psi
 ASTM D638
Flexural Strength (Break)
psi
 ASTM D790
Compressive Strength
psi
 ASTM D695
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
CLTE - Flow
in/in/°F
 ASTM D696
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life (75°F)
min
  
Thermoset Mix Viscosity (75°F)
cP
 ASTM D2393
Demold Time (75°F)
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BCC Resins BC 7069-2, BCC Resins BC 70692, BCC Resins , BCCResinsBC70692, BCCResins, BC 7069, ResinsBC 7069-2, ResinsBC 70692, ResinsBC 7069:2, ResinsBC 7069/2, ResinsBC 7069+2, ResinsBC 7069_2, ResinsBC 7069 2, ResinsBC7069, ResinsBC 7069, ResinsBC70692, BC 7069-2, BC 70692, BC 7069:2, BC 7069/2, BC 7069+2, BC 7069_2, BC 7069 2, BC7069, 70692, ResinsBC7069_2, BC70692, BC7069_2, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, BCC Products, EpoxyEpoxide, 7069BC, 7069ResinsBC
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Good Toughness, Tough, High Hardness, Hard.
Uses
Uses may also be described by the following terms: Molds/Dies/Tools, Molds, Dies, tools.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.