IDES Prospector Already have an account? Login Here

IDES

Clariant PC PC-030-L

Polycarbonate

Glass Fiber Reinforcement, 30%

Supplied by Clariant Performance Plastics

The technical datasheet with complete property values for Clariant PC PC-030-L is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • Lubricant
Features 
  • Good Stiffness
  • Lubricated
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Tensile Impact Strength
ft·lb/in²
 ASTM D1822
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Melting Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Clariant PC PC-030-L, Clariant PC PC030L, Clariant PC , ClariantPCPC030L, ClariantPC, PC, PCPC-030-L, PCPC030L, PCPC:030:L, PCPC/030/L, PCPC+030+L, PCPC_030_L, PCPC 030 L, PCPC030, PCPC, PC-030-L, PC030L, PC:030:L, PC/030/L, PC+030+L, PC_030_L, PC 030 L, PC030, 030L, Polycarbonate, Clariant Perf, 030PC, 030PCPC
Features
Features may also be described by the following terms: Good Stiffness.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.