IDES Prospector Already have an account? Login Here

IDES

Conathane DPEN-8536

Polyurethane

Supplied by Conap, Inc, a Division of Cytec Industries Inc.

The technical datasheet with complete property values for Conathane DPEN-8536 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • North America
Features 
  • Fast Cure
  • Fast Gel
  • Good Flexibility
  • Good Thermal Shock Resistance
  • Low to No Water Absorption
  • Low Viscosity
Appearance 
  • Clear Amber
Forms 
  • Liquid
Processing Method 
  • Encapsulating
  • Potting
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant
     ASTM D150
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     ASTM D150
100 Hz
 
  
1 MHz
 
  
Arc Resistance
sec
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life (77°F)
min
  
Thermoset Mix Viscosity (77°F)
cP
 ASTM D2393
Demold Time
      
77°F
min
  
122°F
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Conathane DPEN-8536, Conathane DPEN8536, Conathane , ConathaneDPEN8536, DPEN, DPEN-8536, DPEN8536, DPEN:8536, DPEN/8536, DPEN+8536, DPEN_8536, DPEN 8536, Polyurethane, Unspecified, Polyurethane Unspecified, PUR, Unspecified, PUR Unspecified, Polyurethane, PUR, Conap, PolyurethaneUnspecified, PURUnspecified, 8536DPEN
Features
Features may also be described by the following terms: Fast Cure, Fast Curing, Good Flexibility, Flexible, Fast Gel, Good Thermal Shock Resistance, Thermal Shock Resistant, Low Viscosity, Low Water Absorption, Low Moisture Absorption, Water Resistant, Moisure Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.