IDES Prospector Already have an account? Login Here

IDES

KIBISAN® PN-117C

Styrene Acrylonitrile

Supplied by CHI MEI CORPORATION

The technical datasheet with complete property values for KIBISAN® PN-117C is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Good Toughness
  • High Clarity
  • High Flow
  • High Strength
  
RoHS Compliance 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 0.125 in)
psi
 ASTM D638
Tensile Elongation 2 (Break, 0.125 in)
%
 ASTM D638
Flexural Modulus 3 (0.250 in)
psi
 ASTM D790
Flexural Strength 3 (0.250 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
73°F, 0.125 in
ft·lb/in
  
73°F, 0.250 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale, 0.250 in)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
264 psi, Unannealed, 0.250 in
°F
  
264 psi, Annealed, 0.250 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 4
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0625 in)
 
 UL 94
Related Terminology
This supplier and product may also be known by these terms: ChiMei

Product names can be difficult to match. You may have searched any one of these terms to find this product: KIBISAN® PN-117C, KIBISAN PN117C, KIBISAN® , KIBISAN, KIBISANPN117C, PN, PN 117 C, PN-117C, PN117C, PN:117C, PN/117C, PN+117C, PN_117C, PN 117C, PN117, 117C, Styrene Acrylonitrile, SAN, Chi Mei, StyreneAcrylonitrile, 117PN
Features
Features may also be described by the following terms: High Clarity, High Flow, High Melt, High MFI, Good Toughness, Tough, High Strength.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Holding Pressure
psi
  
Back Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
20.24 in/min
30.11 in/min
4Rate A (50°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.