IDES Prospector Already have an account? Login Here

IDES

Ipiranga GC 7260 LS

High Density Polyethylene

Supplied by Braskem

The technical datasheet with complete property values for Ipiranga GC 7260 LS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HDPE GC 7260 LS is a high-density polyethylene developed for the injection segment that has high density, hardness, stiffness, and has low tendency to deformation.
This resin has additives against the ultraviolet radiation action, not being indicated for use in applications in contact with foods.
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Additive 
  • UV Stabilizer
Features 
  • High Density
  • High Hardness
  • High Stiffness
Uses 
  • Crates
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus - 2% Secant
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, 15 sec)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 2
Additional Information
Density, ASTM D792: 0.956 to 0.962 g/cm³
Melt Flow Rate (MFR), ASTM D1238, 190°C/2.16 kg: 6.4 to 9.6 g/10min
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ipiranga GC 7260 LS, Ipiranga , IpirangaGC7260LS, GC 7260 LS, GC7260, 7260LS, GC7260LS, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Braskem, PolyethyleneHighDensity, 7260GC
Features
Features may also be described by the following terms: High Density, High Specific Gravity, High Hardness, Hard, High Stiffness.
Injection
Nominal Value
Unit
 
Hopper Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Injection Notes
Nozzle: 50%
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.