Dynaflex™ G7430-9001-00 GLS Thermoplastic Elastomer

Product Description

Dynaflex™ G7430-9001-00 is an easy processing, high performance compound designed for use in applications requiring tough, durable material.

Excellent Heat Stability

Good Ozone and UV Stability

Overmold Adhesion to Polypropylene

Suitable for Outdoor Use

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

North America

South America

Features

Good Thermal Stability

Good UV Resistance

High Strength

Ozone Resistant

Recyclable Material

Uses

Appliance Components

Consumer Applications

Overmolding

Sporting Goods

Strain Reliefs

RoHS Compliance

Appearance

Black

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow		in/in	ASTM D955
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress^2, 3			ASTM D412
100% Strain, 73°F		psi
300% Strain, 73°F		psi
Tensile Strength^2, 3 (Break, 73°F)		psi	ASTM D412
Tensile Elongation^2, 3 (Break, 73°F)		%	ASTM D412
Tear Strength		lbf/in	ASTM D624
Compression Set (73°F, 22.0 hr)		%	ASTM D395B
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 10 sec)			ASTM D2240
Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (392°F, 11200 sec^-1)		Pa·s	ASTM D3835
Additional Information
Dynaflex™ G7430-9001-00 can be recycled as a filler or impact modifier for polyolefins, or can be recycled by grinding and reintroduction to the molding process. Similar to PP or PE recycling process, if separated appropriately, it can be recycled many times. Municipality waste stream recycle code is "7" which is designated for "Other". Please contact GLS Thermoplastic Elastomers for a copy of our Recyclability Compliance letter.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Dynaflex™ G7430-9001-00, Dynaflex G7430900100, Dynaflex™ , Dynaflex, DynaflexG7430900100, G 7430, G 7430 9001 00, G7430-9001-00, G7430900100, G7430:9001:00, G7430/9001/00, G7430+9001+00, G7430_9001_00, G7430 9001 00, G7430, 74309001, 900100, Thermoplastic Elastomer, TPE, GLS, ThermoplasticElastomer, 7430G
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Good Thermal Stability, High Strength.
Uses
Uses may also be described by the following terms: Appliance Components, Appliance Parts.

Injection	Nominal Value	Unit
Suggested Max Regrind		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Back Pressure		psi
Screw Speed		rpm
Injection Notes
Purge thoroughly before and after use of this product with a low flow (0.5 - 2.5 MFR) polyethylene (PE) or polypropylene (PP). Regrind levels up to 20% can be used with Dynaflex™ G7430-9001-00 with minimal property loss, provided that the regrind is free of contamination. To minimize losses during molding, the melt tempetature should remain as low as possible. The final determination of regrind effectiveness should be determined by the customer. Drying is not Required Injection Speed: 1 to 5 in/sec 1st Stage - Boost Pressure: 250 to 650 psi 2nd Stage - Hold Pressure: 50% of Boost Hold Time (Thick Part): 4 to 10 sec Hold Time (Thin Part): 1 to 3 sec

Notes

¹Typical properties: these are not to be construed as specifications.

²Die C

³2 hr

Dynaflex™ G7430-9001-00

Thermoplastic Elastomer

Supplied by GLS Thermoplastic Elastomers