IDES Prospector Already have an account? Login Here

IDES

Luvotech® J-50/10

Polycarbonate

Glass Fiber Reinforcement, 10%

Supplied by Techmer Lehvoss Compounds

The technical datasheet with complete property values for Luvotech® J-50/10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Molding Parameters:
4 hours recommended for high tensile strength and smooth surface finish, or for vacuum metalizing.
The dry temperature at 16 hours is 180°F.
For 2-zone machines, the rear temperature is 600-650°F, and the front temperature is 580-620°F.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Fatigue Resistant
  • Good Creep Resistance
  • Good Dimensional Stability
  • High Heat Resistance
  • High Strength
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ASTM D638
Tensile Strength (Break, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (Break, 73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.250 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0580 in
 
  
0.120 in
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
     UL 746
0.0580 in
°F
  
0.120 in
°F
  
RTI Imp
     UL 746
0.0580 in
°F
  
0.120 in
°F
  
RTI Elec
     UL 746
0.0580 in
°F
  
0.120 in
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Luvotech® J-50/10, Luvotech J5010, Luvotech® , Luvotech, LuvotechJ5010, J 50 10, J-50/10, J5010, J-50:10, J-50+10, J-50-10, J-50_10, J-50 10, J:50/10, J/50/10, J+50/10, J_50/10, J 50/10, J50, 5010, J50_10, J50 10, J_5010, J 5010, Polycarbonate, PC, Techmer Lehvoss, 50J
Features
Features may also be described by the following terms: Good Creep Resistance, Creep Resistant, Good Dimensional Stability, Dimensionally Stable, High Heat Resistance, High Strength.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.