IDES Prospector Already have an account? Login Here

IDES

DEXFLEX® E300

Thermoplastic Polyolefin Elastomer

Supplied by LyondellBasell Advanced Polyolefins USA, Inc.

The technical datasheet with complete property values for DEXFLEX® E300 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DEXFLEX® E300 thermoplastic olefinic elastomer (TPO) is designed for industrial exterior application requiring toughness and colorability. This extrusion-grade material is readily processed into a variety of sheet and profile products. This material can be supplied with or without UV stabilizers.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Colorability
  • Good Toughness
  
Uses 
  • Profiles
  • Sheet
  
Processing Method 
  • Profile Extrusion
  • Sheet Extrusion
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus - Tangent 3
psi
 ASTM D790
Elastomers
Nominal Value
Unit
Test Method
Tear Strength 4
lbf/in
 ASTM D1004
Impact
Nominal Value
Unit
Test Method
Gardner Impact
     ASTM D3029
-22°F
in·lb
  
73°F
in·lb
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
CLTE - Flow
in/in/°F
 ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DEXFLEX® E300, DEXFLEX E300, DEXFLEX® , DEXFLEX, DEXFLEXE300, E 300, E300, TPO, Thermoplastic Polyolefin Elastomer, TPO (POE), TPO POE, Thermoplastic Elastomer, TPE, LyondellBasell APO, ThermoplasticPolyolefinElastomer, TPOPOE, ThermoplasticElastomer, 300E
Features
Features may also be described by the following terms: Good Colorability, Good Toughness, Tough.
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 2.0 in/min
30.50 in/min
42.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.