IDES Prospector Already have an account? Login Here

IDES

Nan Ya PET 4410G6

Polyethylene Terephthalate

Glass Fiber Reinforcement, 30%

Supplied by Nan Ya Plastics Corporation

The technical datasheet with complete property values for Nan Ya PET 4410G6 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Flame Retardant
Uses 
  • Automotive Applications
  • Automotive Electronics
  • Electrical Parts
  • Electrical/Electronic Applications
  • Furniture
  • Gears
  • Pump Parts
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (285°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Melting Temperature
°F
  
Specific Heat
Btu/lb/°F
 ASTM C351
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant (0.125 in, 1 MHz)
 
 ASTM D150
Dissipation Factor (0.125 in, 1 MHz)
 
 ASTM D150
Arc Resistance (0.118 in)
sec
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0300 in
 
  
0.118 in
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
     UL 746
0.0300 in
°F
  
0.118 in
°F
  
RTI Imp
     UL 746
0.0300 in
°F
  
0.118 in
°F
  
RTI Elec
     UL 746
0.0300 in
°F
  
0.118 in
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Nan Ya PET 4410G6, Nan Ya PET , NanYaPET4410G6, NanYaPET, PET 4410 G 6, PET4410G6, PET4410, PET, 4410 G 6, 4410G6, 4410G, G6, Polyethylene Terephthalate, Polyester, Nan Ya Plastics, PolyethyleneTerephthalate, G4410, 4410PET
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.