IDES Prospector Already have an account? Login Here

IDES

Ren:c:o-thane RP 6401-1

Polyurethane Thermoset Elastomer

Supplied by Huntsman Advanced Materials

The technical datasheet with complete property values for Ren:c:o-thane RP 6401-1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Tear Strength
  • High Elongation
  • Low Viscosity
  • Resilient
  
Uses 
  • Molds/Dies/Tools
Appearance 
  • White
Forms 
  • Liquid
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Elastomers
Nominal Value
Unit
Test Method
Tear Strength
lbf/in
 ASTM D624
Compression Set
%
 ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Shelf Life (70°F)
wk
  
Thermoset Mix Viscosity
cP
 ASTM D2393
Demold Time (77°F)
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ren:c:o-thane RP 6401-1, Rencothane RP 64011, Ren:c:o-thane , Rencothane, Ren/c/o-thane, Ren+c+o-thane, Ren-c-o-thane, Ren_c_o-thane, Ren c o-thane, Ren:c:o:thane, Ren:c:o/thane, Ren:c:o+thane, Ren:c:o_thane, Ren:c:o thane, RencothaneRP64011, Ren_c_othane, Ren c othane, Renco_thane, Renco thane, RP 6401, RP 6401-1, RP 64011, RP 6401:1, RP 6401/1, RP 6401+1, RP 6401_1, RP 6401 1, RP6401, 64011, RP64011, RP6401_1, Polyurethane Thermoset Elastomer, TSU, Huntsman Adv Matl, PolyurethaneThermosetElastomer, 6401RP
Features
Features may also be described by the following terms: High Elongation, Good Tear Strength, Low Viscosity.
Uses
Uses may also be described by the following terms: Molds/Dies/Tools, Molds, Dies, tools.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.