EVAL H101 Eval Ethylene Vinyl Alcohol

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg		g/10 min
210°C/2.16 kg		g/10 min
Ethylene Content		wt%	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ASTM D638
Tensile Strength			ASTM D638
Yield		psi
Break		psi
Tensile Elongation			ASTM D638
Yield		%
Break		%
Flexural Modulus		psi	ASTM D790
Flexural Strength		psi	ASTM D790
Taber Abrasion Resistance		mg	ASTM D1044
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature (DSC)		°F	DSC
Melting Temperature		°F	DSC
Peak Crystallization Temperature (DSC)		°F	ASTM D3418
Additional Information
Flow Start Temperature, Kouka Flow Tester: 171°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EVAL® H101, EVAL H101, EVAL® , EVAL, EVALH101, H 101, H101, Ethylene Vinyl Alcohol, EVOH, Vinyl Alcohol, VOH, EthyleneVinylAlcohol, VinylAlcohol, 101H

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Cylinder Zone 5 Temp.		°F
Adapter Temperature		°F
Melt Temperature		°F
Die Temperature		°F
Extrusion Notes
The recommended design for metering screws: L/D Ratio: 24 to 30 Compression Ratio: 2.6 to 3.6 Zone Distribution: Feed: 8 to 10 D Compression: 8 to 10 D Metering: 8 to 10 D The recommended design for barrier screws: L/D Ratio: 24 to 30 Compression Ratio: 2.5 to 3 Zone Distribution: Feed: 6 to 7.5 D (25% of screw length) Transition and Melting: 12 to 15 D (50% of screw length) Metering: 6 to 7.5 D (25% of screw length)

Notes

¹Typical properties: these are not to be construed as specifications.

EVAL® H101