IDES Prospector Already have an account? Login Here

IDES

Ateva® 1081

Ethylene Vinyl Acetate Copolymer

Supplied by Celanese EVA Performance Polymers

The technical datasheet with complete property values for Ateva® 1081 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This natural copolymer is recommended for tubing applications.
This resin is well suited for film extrusions requiring superior sealability and strength.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Heat Seal
  • High Strength
  
Uses 
  • Film
  • Medical/Healthcare Applications
  • Packaging
  • Tubing
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Coextrusion
  • Extrusion
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Vinyl Acetate Content
wt%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Break)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength 3
     ASTM D882A
MD: Yield, 3.0 mil
psi
  
TD: Yield, 3.0 mil
psi
  
MD: Break, 3.0 mil
psi
  
TD: Break, 3.0 mil
psi
  
Tensile Elongation 3
     ASTM D882A
MD: Break, 3.0 mil
%
  
TD: Break, 3.0 mil
%
  
Dart Drop Impact 4 (0.98 mil)
g
 ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
 DSC
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 2.95 mil)
 
 ASTM D2457
Haze (2.95 mil)
%
 ASTM D1003
Additional Information
Brittle Temp, ASTM D746: <-85°C
The value listed as Density ASTM D1505, was also tested in accordance with ASTM D1928 Proc A.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ateva® 1081, Ateva 1081, Ateva® , Ateva, Ateva1081, 1081, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Celanese EVA, EthyleneVinylAcetateCopolymer
Features
Features may also be described by the following terms: Good Heat Seal, High Strength.
Uses
Uses may also be described by the following terms: Tubing, Tube, Medical Applications.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Screw L/D Ratio
 
  
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 2.0 in/min
320 in/min
4F50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.