IDES Prospector Already have an account? Login Here

IDES

Ateva® 1231

Ethylene Vinyl Acetate Copolymer

Supplied by Celanese EVA Performance Polymers

The technical datasheet with complete property values for Ateva® 1231 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Copolymer
  • Food Contact Acceptable
 
Uses 
  • Blending
  • Film
  • Foam
  • Medical/Healthcare Applications
  • Packaging
  • Tubing
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Coextrusion
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Vinyl Acetate Content
wt%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Break)
psi
ASTM D638
Tensile Elongation 2 (Break)
%
ASTM D638
Flexural Modulus - 1% Secant
psi
ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
    ASTM D2240
Shore A
 
 
Shore D
 
 
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
ASTM D746
Vicat Softening Temperature
°F
ASTM D1525
Melting Temperature
°F
DSC
Additional Information
The value listed as Density ASTM D1505, was also tested in accordance with ASTM D1928 Proc A.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ateva® 1231, Ateva 1231, Ateva® , Ateva, Ateva1231, 1231, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Celanese EVA, EthyleneVinylAcetateCopolymer
Uses
Uses may also be described by the following terms: Tubing, Tube, Medical Applications.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 2.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.