IDES Prospector Already have an account? Login Here

IDES

Ateva® 1811

Ethylene Vinyl Acetate Copolymer

Supplied by Celanese EVA Performance Polymers

The technical datasheet with complete property values for Ateva® 1811 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Copolymer
  • Crosslinkable
  • Foamable
Uses 
  • Blending
  • Foam
  • Packaging
  • Sheet
  
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Extrusion
  • Sheet Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Vinyl Acetate Content
wt%
  
Films
Nominal Value
Unit
Test Method
Tensile Strength 2     ASTM D882A
MD: Yield, 3.0 mil
psi
  
TD: Yield, 3.0 mil
psi
  
MD: Break, 3.0 mil
psi
  
TD: Break, 3.0 mil
psi
  
Tensile Elongation 2     ASTM D882A
MD: Break, 3.0 mil
%
  
TD: Break, 3.0 mil
%
  
Dart Drop Impact 3 (0.98 mil)
g
 ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 DSC
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 2.95 mil)
 
 ASTM D2457
Haze (2.95 mil)
%
 ASTM D1003
Additional Information
Brittle Temp, ASTM D746: <-85°C
The value listed as Density ASTM D1505, wa also tested in accordance with ASTM D1928 Proc A.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ateva® 1811, Ateva 1811, Ateva® , Ateva, Ateva1811, 1811, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Celanese EVA, EthyleneVinylAcetateCopolymer
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
220 in/min
3F50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.