IDES Prospector Already have an account? Login Here

IDES

Plexiglas® SG10

Polymethyl Methacrylate Acrylic

Supplied by Altuglas International of Arkema Inc.

The technical datasheet with complete property values for Plexiglas® SG10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Plexiglas® SG10 is an impact modified acrylic resin suitable for injection molding and extrusion. It is a high flow resin designed to provide outstanding light transmission and water white clarity for disposable medical applications.

Some of the features and benefits of Plexiglas® SG10 are:

  • Chemical Resistance
    • Good resistance to lipids and drug formulations
    • Good resistance to isopropyl alcohol (IPA)
    • Property retention after exposure to hospital antiseptics, acids and bases

  • Sterilization
    • Stable to gamma radiation, E-beam, and ETO
    • Rapid recovery with excellent color stability
    • Retention of transparency and clarity
    • Retention of mechanical properties

  • Durability and Processability
    • Moldflow simulation data available
    • Excellent melt processability
    • Reduced cycle times
    • Suitable for thin-wall applications and complex multi-cavity molds
    • Good bondability using solvent, ultrasonic, or radio frequency methods
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Impact Modifier
Features 
  • Alcohol Resistant
  • Biocompatible
  • Bondability
  • BPA Free
  • E-beam Sterilizable
  • Ethylene Oxide Sterilizable
  • Good Chemical Resistance
  • Good Moldability
  • High Clarity
  • High ESCR (Stress Crack Resist.)
  • High Impact Resistance
  • Impact Modified
  • Radiation (Gamma) Resistant
Uses 
  • Medical Appliances
  • Medical/Healthcare Applications
  
Agency Ratings 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Spiral Flow 2 (464°F)
in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load 3
     ASTM D648
66 psi, Annealed
°F
  
264 psi, Annealed
°F
  
Vicat Softening Temperature
      
--
°F
 ASTM D1525 4
--
°F
 ASTM D1525 5
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM C177
Optical
Nominal Value
Unit
Test Method
Refractive Index 6
 
 ASTM D542
Transmittance (125 mil)
%
 ASTM D1003
Haze (125 mil)
%
 ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
ASTM Classification
 
 ASTM D788
Related Terminology
This supplier and product may also be known by these terms: Plexiglass

Product names can be difficult to match. You may have searched any one of these terms to find this product: Plexiglas® SG10, Plexiglas SG10, Plexiglas® , Plexiglas, PlexiglasSG10, SG 10, SG10, Acrylic, Acrylic, Polymethyl Methacrylate, Acrylic Polymethyl Methacrylate, Acrylic (PMMA), Acrylic PMMA, pmma, Altuglas/Arkema, AcrylicPolymethylMethacrylate, AcrylicPMMA, 10SG
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Moldability, Ethylene Oxide Sterilizable, EtO Sterilizable, EtO Sterilization, Ethylene Oxide Sterilizable, Radiation Resistant, Gamma Stable, Gamma Resistant, Radiation Stable, e-beam Sterilization, E-beam Sterilizable, electron beam, electron-beam, electron beam radiation, e-beam radiation, Bondability, Bondable, BPA Free, Bisphenol A Free, High Clarity, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Impact Resistance.
Uses
Uses may also be described by the following terms: Medical Applications.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ISO (2), USP (1).
Notes
1Typical properties: these are not to be construed as specifications.
22 mm (79 mil) channel
3Annealing Cycle: 4hrs @ 80°C (176°F)
4Rate A (50°C/h), Loading 1 (10 N)
5Rate A (50°C/h), Loading 2 (50 N)
6ND @ 23°C (73°F)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.