IDES Prospector Already have an account? Login Here

IDES

API PS 395

General Purpose Polystyrene

Supplied by American Polymers, Inc.

The technical datasheet with complete property values for API PS 395 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
API 395 is one of the highest flowing crystal polystyrenes commercially available. It is produced in pellet form for injection molding and compounding. This material is designed for hard to fill applications.
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • North America
Features 
  • Crystal
  • High Flow
  
Uses 
  • Compounding
Forms 
  • Pellets
Processing Method 
  • Compounding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in, Injection Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (L-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Annealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: API PS 395, API PS , APIPS395, APIPS, PS 395, PS395, PS, 395, Polystyrene, General Purpose, Polystyrene General Purpose, PS (GPPS), PS GPPS, Polystyrene, American Poly, PolystyreneGeneralPurpose, PSGPPS, 395PS
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Uses
Uses may also be described by the following terms: Compounding, Compounds.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.