IDES Prospector Already have an account? Login Here

IDES

LIM Silicones FSL7210 pc8hr

Fluorosilicone

Supplied by Momentive Performance Materials

The technical datasheet with complete property values for LIM Silicones FSL7210 pc8hr is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
The properties represented on this datasheet are based on the material postcured for 8 hours at 400°F.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Fast Cure
  • Low Temperature Flexibility
  • Medium Viscosity
  • Solvent Resistant
  
Appearance 
  • Brown
Forms 
  • Liquid
Processing Method 
  • Compression Molding
  • Liquid Injection Molding (LIM)
  
Physical
Nominal Value
Unit
Test Method
Apparent Density
g/cm³
 ASTM D1895
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Compression Set (351°F)
%
 ASTM D395
Thermal
Nominal Value
Unit
Test Method
Max. Continuous Use Temperature
°F
 ASTM D794
Brittleness Temperature
°F
 ASTM D746
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant
     ASTM D150
60 Hz
 
  
100 kHz
 
  
Dissipation Factor
     ASTM D150
60 Hz
 
  
100 kHz
 
  
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life (75°F)
min
  
Shelf Life (77°F)
wk
  
Demold Time (351°F)
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: LIM Silicones FSL7210 pc8hr, LIM Silicones , LIMSiliconesFSL7210pc8hr, LIMSilicones, SiliconesFSL 7210 pc 8 hr, SiliconesFSL7210 pc8hr, SiliconesFSL7210, Silicones, FSL 7210 pc 8 hr, SiliconesFSL7210pc8hr, FSL7210 pc8hr, FSL7210, 7210pc, pc8, 8hr, FSL7210pc8hr, Fluorosilicone, Fluoro Si, Fluoropolymer, Momentive, FluoroSi, 7210FSL, 7210SiliconesFSL
Features
Features may also be described by the following terms: Fast Cure, Fast Curing, Low Temperature Flexibility, Medium Viscosity.
Injection
Nominal Value
Unit
 
Mold Temperature
°F
  
Injection Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.