IDES Prospector Already have an account? Login Here

IDES

Shincor LIM KE-1990-40

Silicone

Supplied by Shincor Silicones, Inc.

The technical datasheet with complete property values for Shincor LIM KE-1990-40 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Fast Cure
  • Heat Cure
  • Low Viscosity
Uses 
  • Caps
  • Computer Components
  • Connectors
  • Electrical Parts
  • Gaskets
  • Seals
Appearance 
  • Translucent
Forms 
  • Liquid
Processing Method 
  • Liquid Injection Molding (LIM)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
lbf/in
 ASTM D624
Compression Set (302°F)
%
 ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life (77°F)
min
  
Shelf Life (90°F)
wk
  
Thermoset Mix Viscosity
cP
 ASTM D2393
Demold Time (240°F)
min
  
Post Cure Time (392°F)
hr
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Shincor LIM KE-1990-40, Shincor LIM KE199040, Shincor LIM , ShincorLIMKE199040, ShincorLIM, KE, LIMKE-1990-40, LIMKE199040, LIMKE:1990:40, LIMKE/1990/40, LIMKE+1990+40, LIMKE_1990_40, LIMKE 1990 40, LIMKE1990, LIMKE, KE-1990-40, KE199040, KE:1990:40, KE/1990/40, KE+1990+40, KE_1990_40, KE 1990 40, KE1990, 199040, Silicone, Shincor Sil, 1990KE, 1990LIMKE
Features
Features may also be described by the following terms: Fast Cure, Fast Curing, Heat Cure, Low Viscosity.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Gaskets, Gasketing, Computer Components, Computer Parts.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.