IDES Prospector Already have an account? Login Here

IDES

Plaslube® AC-80/TF/20

Acetal (POM) Copolymer

Supplied by Techmer Lehvoss Compounds

The technical datasheet with complete property values for Plaslube® AC-80/TF/20 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Additive 
  • PTFE Lubricant (200000 ppm)
Features 
  • Copolymer
  • Lubricated
  
Uses 
  • Bearings
  • Gears
  
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (73°F)
psi
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Coefficient of Friction
     ASTM D1894
vs. Metal - Dynamic
 
  
vs. Metal - Static
 
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0625 in)
 
 UL 94
Additional Information
Coefficient of Friction, Static, Thrust washer, 40psi, ambient temp.: 0.07
Coefficient of Friction, Dynamic, Thrust washer, 40psi, 50 ft/min, ambient temp.: 0.15
Limiting PV, Thrust washer, 100 FPM, ambient temp.: 1.3E4
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Plaslube® AC-80/TF/20, Plaslube AC80TF20, Plaslube® , Plaslube, PlaslubeAC80TF20, AC, AC 80 TF 20, AC-80/TF/20, AC80TF20, AC-80:TF:20, AC-80+TF+20, AC-80-TF-20, AC-80_TF_20, AC-80 TF 20, AC:80/TF/20, AC/80/TF/20, AC+80/TF/20, AC_80/TF/20, AC 80/TF/20, AC80, 80TF, TF20, AC80_TF_20, AC80 TF 20, AC_80TF20, AC 80TF20, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, Techmer Lehvoss, AcetalPOMCopolymer, 80AC
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Back Pressure
psi
  
Injection Notes
Screw Speed: Medium
Recommendations for Molding and Tool Conditions: Well vented
Moisture Content, as received: Product is packaged at 0.2% or less.
Drying not normally required. Dry at 180°F for 1 to 2 hours if necessary.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.