Fiberfil J-60/GB/20 Fiberfil Polypropylene Homopolymer (Glass Bead, 20%)

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow (0.250 in)		in/in	ASTM D955
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ASTM D638
Tensile Strength (73°F)		psi	ASTM D638
Tensile Elongation (Yield, 73°F)		%	ASTM D638
Flexural Modulus - Tangent (73°F)		psi	ASTM D790
Flexural Strength (73°F)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.125 in)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Fiberfil® J-60/GB/20, Fiberfil J60GB20, Fiberfil® , Fiberfil, FiberfilJ60GB20, J 60 GB 20, J-60/GB/20, J60GB20, J-60:GB:20, J-60+GB+20, J-60-GB-20, J-60_GB_20, J-60 GB 20, J:60/GB/20, J/60/GB/20, J+60/GB/20, J_60/GB/20, J 60/GB/20, J60, 60GB, GB20, J60_GB_20, J60 GB 20, J_60GB20, J 60GB20, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, PolypropyleneHomopolymer, PPHomopolymer, 60J

Notes

¹Typical properties: these are not to be construed as specifications.

Fiberfil® J-60/GB/20