IDES Prospector Already have an account? Login Here

IDES

Shincor LIM SG-035

Silicone

Supplied by Shincor Silicones, Inc.

The technical datasheet with complete property values for Shincor LIM SG-035 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Properties are for a press cured material
Catalyzed with 2,4-dichlorobenzoyl peroxide 50% active.
Press cured 10 min @ 142°C.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • General Purpose
  • Good Processability
  
Uses 
  • Automotive Under the Hood
  • Diaphrams
  • Gaskets
  • Industrial Applications
  • Military Applications
Forms 
  • Pellets
Processing Method 
  • Calendering
  • Extrusion
  • Liquid Injection Molding (LIM)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress (100% Strain)
psi
 ASTM D412
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Shincor LIM SG-035, Shincor LIM SG035, Shincor LIM , ShincorLIMSG035, ShincorLIM, SG, LIMSG-035, LIMSG035, LIMSG:035, LIMSG/035, LIMSG+035, LIMSG_035, LIMSG 035, LIMSG, SG-035, SG035, SG:035, SG/035, SG+035, SG_035, SG 035, Silicone, Shincor Sil, 035SG, 035LIMSG
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.