IDES Prospector Already have an account? Login Here

IDES

Shincor LIM SVX-14001B-7 A/B

Silicone

Supplied by Shincor Silicones, Inc.

The technical datasheet with complete property values for Shincor LIM SVX-14001B-7 A/B is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This material is supplied as two components which are mixed in a 1:1 ratio.
Properties are for a specimen press cured 10 min. @ 170°C.
Press cured 10 min @ 170°C.
Post cured 4 hrs. @ 200°C.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Fast Cure
  • Good Tear Strength
  
Uses 
  • Caps
  • Connectors
  • Diaphrams
  • Electrical Parts
  
Appearance 
  • Translucent
Forms 
  • Pellets
Processing Method 
  • Liquid Injection Molding (LIM)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Shincor LIM SVX-14001B-7 A/B, Shincor LIM SVX14001B7 AB, Shincor LIM , ShincorLIMSVX14001B7AB, ShincorLIM, LIMSVX 14001 B 7 A B, SVX, LIMSVX-14001B-7 A/B, LIMSVX14001B7 AB, LIMSVX-14001B-7 A:B, LIMSVX-14001B-7 A+B, LIMSVX-14001B-7 A-B, LIMSVX-14001B-7 A_B, LIMSVX-14001B-7 A B, LIMSVX:14001B:7 A/B, LIMSVX/14001B/7 A/B, LIMSVX+14001B+7 A/B, LIMSVX_14001B_7 A/B, LIMSVX 14001B 7 A/B, LIMSVX14001, LIMSVX, SVX 14001 B 7 A B, LIMSVX14001B7AB, LIMSVX14001B7 A_B, LIMSVX14001B7 A B, LIMSVX_14001B_7 AB, LIMSVX 14001B 7 AB, SVX-14001B-7 A/B, SVX14001B7 AB, SVX-14001B-7 A:B, SVX-14001B-7 A+B, SVX-14001B-7 A-B, SVX-14001B-7 A_B, SVX-14001B-7 A B, SVX:14001B:7 A/B, SVX/14001B/7 A/B, SVX+14001B+7 A/B, SVX_14001B_7 A/B, SVX 14001B 7 A/B, SVX14001, 14001B, B7, 7A, AB, LIMSVX14001B7A_B, LIMSVX_14001B_7AB, SVX14001B7AB, SVX14001B7 A_B, SVX14001B7 A B, SVX_14001B_7 AB, SVX 14001B 7 AB, SVX14001B7A_B, SVX_14001B_7AB, Silicone, Shincor Sil, 14001SVX, 14001LIMSVX
Features
Features may also be described by the following terms: Good Tear Strength, Fast Cure, Fast Curing.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.