IDES Prospector Already have an account? Login Here

IDES

Shincor LIM KE-174 U

Silicone

Supplied by Shincor Silicones, Inc.

The technical datasheet with complete property values for Shincor LIM KE-174 U is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Properties are for a specimen press cured 10 min. @ 170°C.
Catalyzed with C-19A 0.5 phr and C-19B 2.4 phr. Levels may vary depending on process method. Contact SHINCOR for recommended levels.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Tear Strength
Uses 
  • Medical/Healthcare Applications
  • Tubing
  
Appearance 
  • Translucent
Forms 
  • Pellets
Processing Method 
  • Liquid Injection Molding (LIM)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Shincor LIM KE-174 U, Shincor LIM KE174 U, Shincor LIM , ShincorLIMKE174U, ShincorLIM, KE, LIMKE-174 U, LIMKE174 U, LIMKE:174 U, LIMKE/174 U, LIMKE+174 U, LIMKE_174 U, LIMKE 174 U, LIMKE174, LIMKE, LIMKE174U, KE-174 U, KE174 U, KE:174 U, KE/174 U, KE+174 U, KE_174 U, KE 174 U, KE174, 174U, LIMKE_174U, KE174U, KE_174U, Silicone, Shincor Sil, 174KE, 174LIMKE
Features
Features may also be described by the following terms: Good Tear Strength.
Uses
Uses may also be described by the following terms: Tubing, Tube, Medical Applications.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.