IDES Prospector Already have an account? Login Here

IDES

Shincor LIM KE-1741 U

Silicone

Supplied by Shincor Silicones, Inc.

The technical datasheet with complete property values for Shincor LIM KE-1741 U is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This material is compounded for use in HAV systems. It can also be cured with Cadox TS-50.
Catalyzed with 0.5 parts Shin-Etsu C-19A and 2.4 parts Shin-Etsu C-19B.
Press cured 10 min. @ 165°C.
Post cured 4 hrs. @ 200°C.
Pot life is 48~72 hrs. after the compound is mixed with C-19A and C-19B.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Uses 
  • Tubing
Appearance 
  • Translucent
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
lbf/in
 ASTM D624
Compression Set (356°F)
%
 ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Pot Life
min
  
Demold Time (329°F)
min
  
Post Cure Time (392°F)
hr
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Shincor LIM KE-1741 U, Shincor LIM KE1741 U, Shincor LIM , ShincorLIMKE1741U, ShincorLIM, KE, LIMKE-1741 U, LIMKE1741 U, LIMKE:1741 U, LIMKE/1741 U, LIMKE+1741 U, LIMKE_1741 U, LIMKE 1741 U, LIMKE1741, LIMKE, LIMKE1741U, KE-1741 U, KE1741 U, KE:1741 U, KE/1741 U, KE+1741 U, KE_1741 U, KE 1741 U, KE1741, 1741U, LIMKE_1741U, KE1741U, KE_1741U, Silicone, Shincor Sil, 1741KE, 1741LIMKE
Uses
Uses may also be described by the following terms: Tubing, Tube.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.