IDES Prospector Already have an account? Login Here

IDES

Shincor LIM SVX-14030 A (U)

Silicone

Supplied by Shincor Silicones, Inc.

The technical datasheet with complete property values for Shincor LIM SVX-14030 A (U) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • Good Colorability
 
Uses 
  • Gaskets
  • Molds/Dies/Tools
  • Seals
Appearance 
  • White
Forms 
  • Pellets
Processing Method 
  • Calendering
  • Extrusion
  • Liquid Injection Molding (LIM)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D412
Tensile Elongation (Break)
%
ASTM D412
Tear Strength
lbf/in
ASTM D624
Compression Set (212°F)
%
ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
ASTM D2240
Additional Information
Catalyzed with 2,4-dichlorobenzoyl peroxide 50% active.
Press cured 10 min. @ 120°C.
Post cured 4 hrs. @ 200°C.
Flame extinguishing time is 5 sec. after 60 sec. ignition on ASTM slabs.
Burning length is 0.4 inches.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Shincor LIM SVX-14030 A, Shincor LIM SVX 14030 A, Shincor LIM SVX-14030 A (U), Shincor LIM SVX14030 A U, Shincor LIM , ShincorLIMSVX14030AU, ShincorLIM, LIMSVX-14030 A, LIMSVX 14030 A, SVX14030 A, SVX, LIMSVX-14030 A (U), LIMSVX14030 A U, LIMSVX:14030 A (U), LIMSVX:14030 A, LIMSVX/14030 A (U), LIMSVX/14030 A, LIMSVX+14030 A (U), LIMSVX+14030 A, LIMSVX_14030 A (U), LIMSVX_14030 A, LIMSVX 14030 A (U), LIMSVX14030, LIMSVX14030 A, LIMSVX, SVX-14030 A, SVX 14030 A, SVX14030A, LIMSVX14030AU, LIMSVX_14030 A U, LIMSVX 14030 A U, LIMSVX14030A, SVX-14030 A (U), SVX14030 A U, SVX:14030 A (U), SVX:14030 A, SVX/14030 A (U), SVX/14030 A, SVX+14030 A (U), SVX+14030 A, SVX_14030 A (U), SVX_14030 A, SVX 14030 A (U), SVX14030, 14030A, AU, SVX_14030A, LIMSVX_14030AU, LIMSVX_14030A, SVX14030AU, SVX_14030 A U, SVX 14030 A U, SVX_14030AU, Silicone, Shincor Sil, 14030SVX, 14030LIMSVX
Features
Features may also be described by the following terms: Good Colorability.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing, Molds/Dies/Tools, Molds, Dies, tools.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.