IDES Prospector Already have an account? Login Here

IDES

Radici Compounds N60125HSL

Polyamide 6

Supplied by Radici Plastics USA, Inc.

The technical datasheet with complete property values for Radici Compounds N60125HSL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
N60125 is an intermediate viscosity nylon 6, suitable for extrusion of sheet, rod or stock shapes, or for injection molding of parts requiring improved practical ductility and toughness. Grades are offered unlubricated primarily for extension, and, for injection molding applications, lubricated for improved mold release. For parts which are to be exposed to high temperature for extended periods of time, the use of N60125HS(L), which contains an effective stabilizer package, is recommended. Mechanical properties for this heat stabilized compound are generally similar to those for the base formulations, except for tensile elongation which may be slightly reduced.

Nylon 6 offers a unique combination of strength and toughness, excellent static and dynamic fatigue resistance, natural lubricity, and resistance to the effects of broad range of chemicals, oils and solvents, and is therefore used for a very wide range of applications in every end-use category.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Heat Stabilizer
  • Lubricant
  
Features 
  • Ductile
  • Good Thermal Stability
  • Good Toughness
  • Heat Stabilized
  
Uses 
  • High Temperature Applications
  • Rods
  • Sheet
  • Stock Material for Machining
  • Tubing
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Tensile Impact Strength (73°F)
ft·lb/in²
 ASTM D1822
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Melting Temperature
°F
 ASTM D789
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Radici Compounds N60125HSL, Radici Compounds , RadiciCompoundsN60125HSL, RadiciCompounds, CompoundsN 60125 HSL, CompoundsN60125HSL, CompoundsN60125, Compounds, N 60125 HSL, N60125HSL, N60125, 60125HSL, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Radici USA, Polyamide6, Nylon6, 60125N, 60125CompoundsN
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Toughness, Tough, Good Thermal Stability.
Uses
Uses may also be described by the following terms: Tubing, Tube, Rods, Rod.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Cushion
in
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.