IDES Prospector Already have an account? Login Here

IDES

Radici Compounds N609

Polyamide 6

Supplied by Radici Plastics USA, Inc.

The technical datasheet with complete property values for Radici Compounds N609 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Modified to significantly improve toughness and flexibility, even dry as molded, while maintaining good tensile strength. Compound exhibits a viscosity suitable for injection molding and many extrusion applications. Also exhibits excellent fatigue resistance, natural lubricity and resistance to the effects of a broad range of chemicals, oils, solvents, and can therefore be considered for use in a very wide range of applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Copolymer
  • Fatigue Resistant
  • General Purpose
  • Good Chemical Resistance
  • Good Flexibility
  • Good Processability
  • Good Toughness
  • High Strength
  • Oil Resistant
  • Self Lubricating
  • Solvent Resistant
Uses 
  • General Purpose
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 73°F, 0.125 in)
psi
 ASTM D638
Tensile Elongation 2 (Break, 73°F, 0.125 in)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Melting Temperature
°F
  
Additional Information
Elongation at Break, ASTM D638, Type I, 73°F, 0.125": 150-200 %
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Radici Compounds N609, Radici Compounds , RadiciCompoundsN609, RadiciCompounds, CompoundsN 609, CompoundsN609, Compounds, N 609, N609, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Radici USA, Polyamide6, Nylon6, 609N, 609CompoundsN
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Toughness, Tough, Good Flexibility, Flexible, High Strength, Good Chemical Resistance, Chemical Resistant, Good Processability, Easy Processing, Self-Lubricating, Self Lubricating.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.