IDES Prospector Already have an account? Login Here

IDES

Radici Compounds N60G06HSL

Polyamide 6

Graphite Fiber Reinforcement, 6.0%

Supplied by Radici Plastics USA, Inc.

The technical datasheet with complete property values for Radici Compounds N60G06HSL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This compound contains 6% glass fiber reinforcement which significantly improves rigidity compared with an unreinforced material, especially at high temperatures. Formulation offers high flow, easy processing and outstanding surface gloss; lubricated for improved mold release. Heat stabilized for use where extended exposure to high temperatures is required.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Graphite Fiber Reinforcement, 6.0% Filler by Weight
Additive 
  • Heat Stabilizer
  • Lubricant
  
Features 
  • Good Mold Release
  • Good Processability
  • Good Thermal Stability
  • Heat Stabilized
  • High Flow
  • High Gloss
  • Lubricated
Uses 
  • High Temperature Applications
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Melting Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Radici Compounds N60G06HSL, Radici Compounds , RadiciCompoundsN60G06HSL, RadiciCompounds, CompoundsN 60 G 06 HSL, CompoundsN60G06HSL, CompoundsN60, Compounds, N 60 G 06 HSL, N60G06HSL, N60, 60G, G06, 06HSL, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Radici USA, Polyamide6, Nylon6, 60N, 60CompoundsN
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Mold Release, Easy Release, Good Demolding, High Flow, High Melt, High MFI, Good Processability, Easy Processing, High Gloss, Good Thermal Stability.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.