IDES Prospector Already have an account? Login Here

IDES

KIBITON® TPE PB-575

Thermoplastic Elastomer

Supplied by CHI MEI CORPORATION

The technical datasheet with complete property values for KIBITON® TPE PB-575 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Kibiton PB-575: Oil extended TPE, high flow and easy to compound. The polymer shows rubber-like properties at room temperature and has high flow property like thermoplastic resins during processing at elevated temperature.
Major Applications: Shoe soles, mechanical goods.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Oil Extended
Uses 
  • Foam
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/5.0 kg
g/10 min
  
200°C/5.0 kg
g/10 min
  
Oil Type (Unspecified Oil)
phr
 ASTM D1416
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Additional Information
BD/SM Ratio, ASTM D1416: 60/40 %
Volatile Matter, ASTM D1416: 0.6%
Ash Content, ASTM D1416: 0.20%
Bale Weight: 20 kg
Related Terminology
This supplier and product may also be known by these terms: ChiMei

Product names can be difficult to match. You may have searched any one of these terms to find this product: KIBITON® TPE PB-575, KIBITON TPE PB575, KIBITON® TPE , KIBITON TPE, KIBITONTPEPB575, KIBITONTPE, PB, TPEPB-575, TPEPB575, TPEPB:575, TPEPB/575, TPEPB+575, TPEPB_575, TPEPB 575, TPEPB, PB-575, PB575, PB:575, PB/575, PB+575, PB_575, PB 575, Thermoplastic Elastomer, TPE, Chi Mei, ThermoplasticElastomer, 575PB, 575TPEPB
Features
Features may also be described by the following terms: Oil Extended.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Holding Pressure
psi
  
Back Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.