IDES Prospector Already have an account? Login Here

IDES

Hostacom 75F4-2

Polypropylene Copolymer

Talc Filler, 20%

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hostacom 75F4-2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hostacom 75F4-2 conventional melt flow, 1,700 MPa flexural modulus, 20% talc-filled polypropylene copolymer has an excellent combination of strength, stiffness, impact resistance and colorability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Latin America
  • North America
  
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Features 
  • Copolymer
  • Good Colorability
  • Good Impact Resistance
  • Good Stiffness
  • Good Surface Finish
  • High Strength
Uses 
  • Appliances
  • Household Goods
  
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (73°F, 48 hr, 0.126 in)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus - Tangent 2
psi
 ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hostacom 75F4-2, Hostacom 75F42, Hostacom , Hostacom75F42, 75 F 4, 75F4, 75 F 4 2, 75F4-2, 75F42, 75F4:2, 75F4/2, 75F4+2, 75F4_2, 75F4 2, 75F, F4, 42, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, LyondellBasell, PolypropyleneCopolymer, PPCopolymer, F75
Features
Features may also be described by the following terms: Good Impact Resistance, Good Stiffness, High Strength, Good Colorability, Good Surface Finish.
Uses
Uses may also be described by the following terms: Household Goods, Housewares.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1).
Notes
1Typical properties: these are not to be construed as specifications.
20.050 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.