Shincor LIM KE-1955 A/B Shincor Sil Silicone

Product Description
The viscosity of KE-1955 A/B is low enough to allow easy pumping through most injection molding systems. Product features include rapid cure time at elevated temperatures, long pot life at room temperature. Typical applications include anode caps, and other electrical parts. Recommended storage of this compound is at or below 90°F and in a dry area. If stored as recommended, KE-1955 A/B will have a shelf life of at least 6 months from the date of shipment. Color A Component: Black B Component: Black
General
Material Status	Commercial: Active
Availability	North America
Features	Heat Cure
Uses	Electrical Parts
Appearance	Black
Forms	Liquid
Processing Method	Liquid Injection Molding (LIM)

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Yield)		psi	ASTM D412
Tensile Elongation (Break)		%	ASTM D412
Tear Strength		lbf/in	ASTM D624
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)			ASTM D2240
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	ASTM D257
Dielectric Strength		V/mil	ASTM D149
Thermoset	Nominal Value	Unit	Test Method
Pot Life (77°F)		min
Shelf Life (90°F)		wk
Thermoset Mix Viscosity		cP	ASTM D2393
Demold Time (248°F)		min
Post Cure Time (302°F)		hr
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Shincor LIM KE-1955 A/B, Shincor LIM KE1955 AB, Shincor LIM , ShincorLIMKE1955AB, ShincorLIM, LIMKE 1955 A B, KE, LIMKE-1955 A/B, LIMKE1955 AB, LIMKE-1955 A:B, LIMKE-1955 A+B, LIMKE-1955 A-B, LIMKE-1955 A_B, LIMKE-1955 A B, LIMKE:1955 A/B, LIMKE/1955 A/B, LIMKE+1955 A/B, LIMKE_1955 A/B, LIMKE 1955 A/B, LIMKE1955, LIMKE, KE 1955 A B, LIMKE1955AB, LIMKE1955 A_B, LIMKE1955 A B, LIMKE_1955 AB, LIMKE 1955 AB, KE-1955 A/B, KE1955 AB, KE-1955 A:B, KE-1955 A+B, KE-1955 A-B, KE-1955 A_B, KE-1955 A B, KE:1955 A/B, KE/1955 A/B, KE+1955 A/B, KE_1955 A/B, KE 1955 A/B, KE1955, 1955A, AB, LIMKE1955A_B, LIMKE_1955AB, KE1955AB, KE1955 A_B, KE1955 A B, KE_1955 AB, KE 1955 AB, KE1955A_B, KE_1955AB, Silicone, Shincor Sil, 1955KE, 1955LIMKE
Features
Features may also be described by the following terms: Heat Cure.

Notes

¹Typical properties: these are not to be construed as specifications.

Shincor LIM KE-1955 A/B