IDES Prospector Already have an account? Login Here

IDES

Westlake HDPE M2004-P

High Density Polyethylene

Supplied by Westlake Chemical Corporation

The technical datasheet with complete property values for Westlake HDPE M2004-P is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
VORIDIAN high-density polyethylene M2004-P is a specialty formulation used for high-speed extrusion coating applications. M2004P offers improvements over low-density polyethylene in barrier properties and high temperature resistance. It can be used to improve scuff resistance, gloss and decreased coefficient of friction (COF).

VORIDIAN M2004-P polyethylene is suggested for applications such as spiral-wound can linings, release paper and photographic paper. M2004-P has been found to exhibit good barrier properties, temperature resistance and stress crack resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Features 
  • High ESCR (Stress Crack Resist.)
  • High Heat Resistance
  • Low Friction
Uses 
  • Automotive Applications
  • Coating Applications
  • Household Goods
  • Liners
  • Paper Coatings
Forms 
  • Pellets
Processing Method 
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D4883
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D638
Yield, Compression Molded
psi
  
Break, Compression Molded
psi
  
Tensile Elongation 2 (Break, Compression Molded)
%
 ASTM D638
Flexural Modulus - 2% Secant 3 (Compression Molded)
psi
 ASTM D790
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Additional Information
When required, specimens are compression-molded according to ASTM D1928.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Westlake HDPE M2004-P, Westlake HDPE M2004P, Westlake HDPE , WestlakeHDPEM2004P, WestlakeHDPE, M 2004, HDPEM 2004 P, HDPEM 2004, HDPEM2004-P, HDPEM2004P, HDPEM2004:P, HDPEM2004/P, HDPEM2004+P, HDPEM2004_P, HDPEM2004 P, HDPEM2004, M 2004 P, M2004-P, M2004P, M2004:P, M2004/P, M2004+P, M2004_P, M2004 P, M2004, 2004P, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Westlake Chem, PolyethyleneHighDensity, 2004M, 2004HDPEM
Features
Features may also be described by the following terms: Low Friction, High Heat Resistance, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Paper Coatings, Paper Coating, Household Goods, Housewares, Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 20 in/min
30.50 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.