Terluran 949 T Styrolution Acrylonitrile Butadiene Styrene

Product Description

Terluran is the tradename for the Styrolution line of ABS polymers. Terluran 900 products are two phase blends which contain a continuous SAN matrix and finely dispersed butadiene rubber particles.

Terluran can be injection molded, extruded, and blow molded.

General

Material Status

Commercial: Active

Availability

Europe

North America

Additive

Rubber

Features

High Heat Resistance

High Rigidity

Medium Impact Resistance

Agency Ratings

RoHS Compliance

Appearance

Black

Colors Available

Natural Color

Forms

Pellets

Processing Method

Blow Molding

Extrusion

Injection Molding

Resin ID (ISO 1043)

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR)			ISO 1133
200°C/21.6 kg		in³/10min
220°C/10.0 kg		in³/10min
Molding Shrinkage		%
Water Absorption
73°F, 24 hr		%	DIN 53495
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2/50
Tensile Strain (Yield)		%	ISO 527-2/50
Tensile Creep Modulus² (1000 hr)		psi	ISO 899-1
Flexural Strength		psi	ISO 178
Shear Modulus		psi	ISO 6721-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Notched Izod Impact
73°F		ft·lb/in	ASTM D256A
-22°F		ft·lb/in²	ISO 180/1A
73°F		ft·lb/in²	ISO 180/1A
Unnotched Izod Impact Strength			ISO 180/1U
-22°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Max. Continuous Use Temperature		°F
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
CLTE - Flow (73 to 176°F)		in/in/°F	DIN 53752
Thermal Conductivity		Btu·in/hr/ft²/°F	DIN 52612
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Dielectric Constant			IEC 60250
100 Hz
1 MHz
Dissipation Factor			IEC 60250
100 Hz
1 MHz
Comparative Tracking Index			IEC 60112
Solution A		V
Solution B		V
Electric Strength		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Flammability
> 39.4 mil			FMVSS 302
Method BH		mm/min	IEC 707
Method FH		in/min	IEC 707
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Terluran® 949 T, Terluran 949 T, Terluran® , Terluran, Terluran949T, 949 T, 949T, Acrylonitrile Butadiene Styrene, ABS, Styrolution, AcrylonitrileButadieneStyrene, T949
Features
Features may also be described by the following terms: High Heat Resistance, High Rigidity, Medium Impact Resistance.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²0.5% Elongation, 23°C

Terluran® 949 T

Acrylonitrile Butadiene Styrene

Supplied by Styrolution