IDES Prospector Already have an account? Login Here

IDES

INEOS PP 3950

Polypropylene Impact Copolymer

Supplied by INEOS Olefins & Polymers USA

The technical datasheet with complete property values for INEOS PP 3950 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Grade 3950 typically has a 35 melt flow rate and is a low gloss, high impact polypropylene copolymer. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.
Applications
  • Automotive interior trim
Benefits
  • Low gloss
  • High impact resistance
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • High Impact Resistance
  • Impact Copolymer
  • Low Gloss
 
Uses 
  • Automotive Interior Trim
Agency Ratings 
RoHS Compliance 
Automotive Specifications 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Molding Shrinkage - Flow (73°F)
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F)
psi
ASTM D638
Tensile Elongation (Break, 73°F)
%
ASTM D638
Flexural Modulus (73°F)
psi
ASTM D790B
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
-4°F, 0.125 in
ft·lb/in
 
73°F, 0.125 in
ft·lb/in
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
ASTM D648
Flammability
Nominal Value
Unit
Test Method
Burning Rate
in/min
FMVSS 302
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS PP 3950, INEOS PP , INEOSPP3950, INEOSPP, PP 3950, PP3950, PP, 3950, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, Ineos USA, PolypropyleneImpactCopolymer, PPImpactCopolymer, 3950PP
Features
Features may also be described by the following terms: Low Gloss, High Impact Resistance, Impact Copolymer.
Automotive Specifications
This plastic material has approval for 3 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (2), GM (1).
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.