IDES Prospector Already have an account? Login Here

IDES

Ferro PP LPP20BN03HB-BK

Polypropylene Copolymer

Calcium Carbonate Filler, 21%

Supplied by Ferro Corporation

The technical datasheet with complete property values for Ferro PP LPP20BN03HB-BK is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Calcium Carbonate Filler, 21% Filler by Weight
Features 
  • Copolymer
  • Good Impact Resistance
  • Good Processability
  • Good UV Resistance
  • Medium Gloss
Uses 
  • Handles
  • Lawn and Garden Equipment
  • Protective Coverings
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus
     ASTM D790
1% Secant: 73°F
psi
  
Tangent: 73°F
psi
  
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F)
ft·lb/in
 ASTM D4812
Gardner Impact (73°F)
in·lb
 ASTM D5420
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ferro PP LPP20BN03HB-BK, Ferro PP LPP20BN03HBBK, Ferro PP , FerroPPLPP20BN03HBBK, FerroPP, LPP 20 BN 03 HB, PPLPP 20 BN 03 HB BK, PPLPP 20 BN 03 HB, LPP20BN03HB, PPLPP20BN03HB-BK, PPLPP20BN03HBBK, PPLPP20BN03HB:BK, PPLPP20BN03HB/BK, PPLPP20BN03HB+BK, PPLPP20BN03HB_BK, PPLPP20BN03HB BK, PPLPP20, PPLPP20BN03HB, LPP 20 BN 03 HB BK, LPP20BN03HB-BK, LPP20BN03HBBK, LPP20BN03HB:BK, LPP20BN03HB/BK, LPP20BN03HB+BK, LPP20BN03HB_BK, LPP20BN03HB BK, LPP20, 20BN, BN03, 03HB, HBBK, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Ferro, PolypropyleneCopolymer, PPCopolymer, 20LPP, 20PPLPP
Features
Features may also be described by the following terms: Medium Gloss, Good Impact Resistance, Good Processability, Easy Processing, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Lawn and Garden Equipment, Lawn Equipment, Garden Equipment, Protective Coverings, Protective Covering.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.