IDES Prospector Already have an account? Login Here

IDES

LNP* Lubriloy* R2000

Polyamide 66

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for LNP* Lubriloy* R2000 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* Lubriloy* R2000 is a compound based on Nylon 66 resin containing Proprietary Lubricant. Added features of this material include: Internally Lubricated.

Also known as: LNP* Lubriloy* Compound R
Product reorder name: R2000
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Lubricant
Features 
  • Lubricated
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
     ASTM D955
Flow: 24 hr
in/in
  
Across Flow: 24 hr
in/in
  
Water Absorption (24 hr, 50% RH)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength
      
Yield
psi
 ASTM D638
Break
psi
 ASTM D638
Break
psi
 ISO 527-2
Tensile Elongation
      
Yield
%
 ASTM D638
Break
%
 ASTM D638
Break
%
 ISO 527-2
Flexural Modulus
      
--
psi
 ASTM D790
--
psi
 ISO 178
Flexural Strength
      
--
psi
 ASTM D790
--
psi
 ISO 178
Coefficient of Friction
     ASTM D3702 Modified
vs. Itself - Dynamic
 
  
vs. Itself - Static
 
  
Wear Factor - Washer
10^-10 in^5-min/ft-lb-hr
 ASTM D3702 Modified
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
73°F
ft·lb/in
 ASTM D256
73°F 3
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact
      
73°F
ft·lb/in
 ASTM D4812
73°F 3
ft·lb/in²
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 4
°F
 ISO 75-2/Af
CLTE
     ASTM E831
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Lubriloy* R2000, LNP Lubriloy R2000, LNP* Lubriloy* , LNP Lubriloy, LNPLubriloyR2000, LNPLubriloy, R 2000, R2000, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, SABIC IP, Polyamide66, Nylon66, 2000R
Generic Name
Generic Name may also be described by the following terms: PA66.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
380*10*4
480*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.