|
Specific Gravity
|
|
|
ASTM D792 |
|
Melt Mass-Flow Rate (MFR)
|
|
|
|
|
230°C/3.8 kg
|
|
g/10 min
|
ASTM D1238 |
|
220°C/10.0 kg
|
|
g/10 min
|
ISO 1133 |
|
Molding Shrinkage - Flow (0.126 in)
|
|
in/in
|
Internal Method |
|
Spiral Flow Length 2 (500°F)
|
|
in
|
Internal Method |
|
Tensile Modulus
|
|
|
|
|
-- 3
|
|
psi
|
ASTM D638 |
|
--
|
|
psi
|
ISO 527-2/1 |
|
Tensile Strength
|
|
|
|
|
Yield 4
|
|
psi
|
ASTM D638 |
|
Yield
|
|
psi
|
ISO 527-2/50 |
|
Flexural Modulus
|
|
|
|
|
1.97 in Span 5
|
|
psi
|
ASTM D790 |
|
-- 6
|
|
psi
|
ISO 178 |
|
Flexural Strength
|
|
|
|
|
-- 6, 7
|
|
psi
|
ISO 178 |
|
Yield, 1.97 in Span 5
|
|
psi
|
ASTM D790 |
|
Charpy Notched Impact Strength 8
|
|
|
ISO 179/1eA |
|
-22°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
|
Notched Izod Impact
|
|
|
|
|
73°F
|
|
ft·lb/in
|
ASTM D256 |
|
-22°F 9
|
|
ft·lb/in²
|
ISO 180/1A |
|
73°F 9
|
|
ft·lb/in²
|
ISO 180/1A |
|
Gardner Impact (73°F)
|
|
in·lb
|
ASTM D3029 |
|
Deflection Temperature Under Load
|
|
|
|
|
66 psi, Unannealed, 0.126 in
|
|
°F
|
ASTM D648 |
|
66 psi, Unannealed, 2.52 in Span 10
|
|
°F
|
ISO 75-2/Bf |
|
264 psi, Unannealed, 0.126 in
|
|
°F
|
ASTM D648 |
|
264 psi, Unannealed, 2.52 in Span 10
|
|
°F
|
ISO 75-2/Af |
|
Vicat Softening Temperature
|
|
°F
|
ISO 306/B50 |
|
CLTE - Flow (-40 to 140°F)
|
|
in/in/°F
|
ASTM E831 |
|
Flame Rating - UL (0.0598 in)
|
|
|
UL 94 |
|
Gardner Gloss (60°, Untextured)
|
|
|
ASTM D523 |
|
Melt Viscosity (500°F, 1000 sec^-1)
|
|
Pa·s
|
ASTM D3835 |
|
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland, Cyclac
Product names can be difficult to match. You may have searched any one of these terms to find this product: CYCOLAC* BDT5510 Resin, CYCOLAC BDT5510 Resin, CYCOLAC* , CYCOLAC, CYCOLACBDT5510Resin, BDT 5510 Resin, BDT5510 Resin, BDT5510, 5510Resin, BDT5510Resin, Acrylonitrile Butadiene Styrene, ABS, SABIC IP, AcrylonitrileButadieneStyrene, 5510BDT
|
|
Features may also be described by the following terms: Low Gloss, High Heat Resistance.
|
|
This plastic material has approval for 5 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (2), CHRYSLER (1), GM (2).
|