IDES Prospector Already have an account? Login Here

IDES

VALOX* 195 Resin

Polybutylene Terephthalate

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for VALOX* 195 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PELLET FORM. For compounding only (not for injection molding). Unreinforced PBT. Melt viscosity between 740 and 900 poise. Natural Color (1001) Only.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Uses 
  • Compounding
Appearance 
  • Natural Color
Processing Method 
  • Compounding Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Specific Volume
in³/lb
 ASTM D792
Molding Shrinkage
     Internal Method
Flow  2
in/in
  
Flow  3
in/in
  
Across Flow  2
in/in
  
Across Flow  3
in/in
  
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 4 (Yield)
psi
 ASTM D638
Tensile Elongation 4 (Break)
%
 ASTM D638
Flexural Modulus 5 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 5 (Yield, 1.97 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F)
ft·lb/in
 ASTM D4812
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.252 in
°F
  
264 psi, Unannealed, 0.252 in
°F
  
CLTE - Flow
     ASTM E831
-40 to 104°F
in/in/°F
  
140 to 280°F
in/in/°F
  
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity
Pa·s
 Internal Method
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: VALOX* 195 Resin, VALOX 195 Resin, VALOX* , VALOX, VALOX195Resin, 195 Resin, 195Resin, Polybutylene Terephthalate, PBT, Polyester, SABIC IP, PolybutyleneTerephthalate, Resin195
Uses
Uses may also be described by the following terms: Compounding, Compounds.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Drying Time (Cumulative): 8 hrs
Water Bath Temperature: 25 - 35 °C
Notes
1Typical properties: these are not to be construed as specifications.
20.75 to 2.3 mm
32.3 to 4.6 mm
4Type I, 2.0 in/min
50.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.