IDES Prospector Already have an account? Login Here

IDES

Carilon DP R1130

Polyketone (Aliphatic)

Glass Fiber Reinforcement, 30%

Supplied by Shell Chemical Company

The technical datasheet with complete property values for Carilon DP R1130 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Carilon DP R1130 has been commercialized as Carilon DB6G6A10.
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Europe
  • North America
  
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Uses 
  • Appliances
  • Automotive Applications
  • Electrical Parts
Appearance 
  • Black
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Yield)
psi
 ASTM D790
Taber Abrasion Resistance (1000 Cycles, 1000 g, CS-17 Wheel)
mg
 ASTM D1044
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-40°F, 0.125 in
ft·lb/in
  
-4°F, 0.125 in
ft·lb/in
  
73°F, 0.250 in
ft·lb/in
  
74°F, 0.125 in
ft·lb/in
  
Unnotched Izod Impact (74°F)
ft·lb/in
 ASTM D256
Gardner Impact
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Vicat Softening Temperature
°F
 ASTM D1525
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength (0.0313 in)
V/mil
 ASTM D149
Dielectric Constant
     ASTM D150
1 kHz
 
  
1 MHz
 
  
Dissipation Factor
     ASTM D150
1 kHz
 
  
1 MHz
 
  
Arc Resistance
sec
 ASTM D495
UL
Nominal Value
Unit
Test Method
Comparative Tracking Index (CTI)
V
 UL 746
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Carilon DP R1130, Carilon , CarilonDPR1130, DP R 1130, DP R1130, DPR, R1130, DPR1130, Polyketone, Polyketone (Aliphatic), Polyketone Aliphatic, PK, Shell Chemical, PolyketoneAliphatic, RDP
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.